Donation

Description:This is a totally selfless posts ;) , because I want to post at least one interesting article per year. So here it is.
If you want to donate to charity you can also donate to me, either go to earn.com/juliane or send me crypto currency to the following addresses:

BTC:11128wGXZWNSZoagFVJPZqRUfBQJoy11nu
ETH: 0x4930A705536554e556ed855a68F1fE3017808628
XMR: 47B8CmCm68h3MCHsF2itL8dg2FER9CfPk6ZVaPgcEhXpgPaXvSwhabMMCTDtoTj8g6iVF4jGMCaZq2yQbfAvfBLM8o3higf

Crypto currencies

Here is a list of sites I used to gather information about crypto currencies

Subreddit for crypto currencies
https://www.reddit.com/r/CryptoCurrency

Hackernoon has two good articles about crypto currencies and the blockchain as a triple-entry accounting system
https://hackernoon.com/a-primer-on-blockchains-protocols-and-token-sales-9ebe117b5759
https://hackernoon.com/why-everyone-missed-the-most-mind-blowing-feature-of-cryptocurrency-860c3f25f1fb

Extensive study about crypto currencies from the university of Cambridge
https://www.jbs.cam.ac.uk/fileadmin/user_upload/research/centres/alternative-finance/downloads/2017-global-cryptocurrency-benchmarking-study.pdf

Statistics about crypto currencies, the first has wonderful pie charts :), the second a good statistic about the overall market capitalization of the different crypto coins and the third also has a good informed user base
https://bitinfocharts.com/cryptocurrency-charts.html
https://coinmarketcap.com/
https://www.cryptocompare.com/

List of crypto currencies on wikipedia
https://en.wikipedia.org/wiki/List_of_cryptocurrencies

Ethereum wiki
https://theethereum.wiki/w/index.php/Main_Page

Coinbase crypto currencie exchange
https://coinbase.com

Groupchat - GroupEe

Group chat app to meet and talk to new people near your world. Talk to friends you haven't met yet.
Download it from here https://play.google.com/store/apps/details?id=eu.awesome.groupee

Heart rate data from 2012 to 2013

Here is a little bit of heart rate data, that I gathered over the years
https://drive.google.com/file/d/0B_YQFkRSeB1-bUNDLVJQODJqWjg/view?usp=sharing

Develop iOS Apps on Windows or Linux

This solution is taking a bit of preparation and is slow but it works for developing iOS Apps on Linux or Windows
The VM often crashes so be warned, a better solution is to buy a iMac.

First use this guide to install VirtualBox and the other stuff
http://www.macbreaker.com/2013/01/iatkos-ml2-mountain-lion-virtualbox.html
and install XCode 4.6.3
Then use this site
http://forums.imore.com/jailbreaking-unlocking-hacks-themes-mods/249838-fake-code-signing-not-working.html
the name for the Certificate should be IPhone Developer
and after creating it search for it and press the Menu button on it select Get Info then click Trust and select Always trust this

Ski trip

If you think heart rate graphs are boring, then look at these. This particular graph is taken from a ski trip of mine. My resting heart beat at night was about 50 beats per minute (bpm) and this value tripled, while skiing on the hills.

If you look closer into the time frame of the ski trip, you can see if I was on the ski slope or on the ski lift.

Estimate volume of STL-File in PHP

I needed a PHP-script that gives me the volume of an STL-File for my 3D-Printer.
I took the script from here and modified it to accept STL-Files, which are encoded in ASCII
In most of the cases the volume is an overestimate, but it works.

<!--
Name: stlvolume.php

Date: July 17, 20
-->

<?php



function stlhandling($volume=0,$toobig=0,$filepath){
$x_max = 0;
$y_max = 0;
$z_max = 0;
$x_min = 0;
$y_min = 0;
$z_min = 0;
//$filepath = "4.stl";
//$filepath = "k.stl";
$fp = fopen($filepath, "rb");

$section = file_get_contents($filepath, NULL, NULL, 0, 79);

$sizeoff=filesize( $filepath );

fseek($fp, 80); 
$data = fread($fp, 4);

$numOfFacets = unpack("I", $data);
//echo $numOfFacets[1];
$pointer=12.5*$i+4;
$binary=1;
if(($numOfFacets[1]*12.5)>$sizeoff)$binary=0;

if($binary==0){fseek($fp, 0);
fgets($fp,100);
fgets($fp,100);
fgets($fp,100);
//echo "ascii";
}

echo $numOfFacets[1];
for ($i = 0; $i < $numOfFacets[1]; $i++){
    //Start Normal Vector
  if($binary==1){
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $normalVectorsX[$i] = $hold[1];
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $normalVectorsY[$i] = $hold[1];
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $normalVectorsZ[$i] = $hold[1];
    //End Normal Vector
    //Start Vertex1
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $vertex1X[$i] = $hold[1];
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $vertex1Y[$i] = $hold[1];
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $vertex1Z[$i] = $hold[1];
    //End Vertex1
    //Start Vertex2
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $vertex2X[$i] = $hold[1];
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $vertex2Y[$i] = $hold[1];
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $vertex2Z[$i] = $hold[1];
    //End Vertex2
    //Start Vertex3
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $vertex3X[$i] = $hold[1];
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $vertex3Y[$i] = $hold[1];
    $data = fread($fp, 4);
    $hold = unpack("f", $data);
    $vertex3Z[$i] = $hold[1];
    //End Vertex3
    //Attribute Byte Count
    $data = fread($fp, 2);
    $hold = unpack("S", $data);
    $abc[$i] = $hold[1];
   }
   if($binary==0){

    //echo substr(fgets($fp,100),13);
    $vertexarray1=explode(" ",substr(fgets($fp,150),13));
    $vertexarray2=explode(" ",substr(fgets($fp,150),13));
    $vertexarray3=explode(" ",substr(fgets($fp,150),13));
    //echo "\n<br>k".floatval($vertexarray1[0]);
    //echo "\n".fgets($fp,100);
    $vertex1X[$i]=$vertexarray1[0];
    $vertex1Y[$i]=$vertexarray1[1];
    $vertex1Z[$i]=$vertexarray1[2];
    $vertex2X[$i]=$vertexarray2[0];
    $vertex2Y[$i]=$vertexarray2[1];
    $vertex2Z[$i]=$vertexarray2[2];
    $vertex3X[$i]=$vertexarray3[0];
    $vertex3Y[$i]=$vertexarray3[1];
    $vertex3Z[$i]=$vertexarray3[2];
    fgets($fp,80);
    fgets($fp,80);
    $ko=fgets($fp,80);
    //echo substr($ko,0,8)."\n<br>";
    if(substr($ko,0,8)=="endsolid")$numOfFacets[1]=$i-1;//found the end of the file
    fgets($fp,190);

  }
   
    $x_vals = array($vertex1X[$i], $vertex2X[$i], $vertex3X[$i]);
    $y_vals = array($vertex1Y[$i], $vertex2Y[$i], $vertex3Y[$i]);
    $z_vals = array($vertex1Z[$i], $vertex2Z[$i], $vertex3Z[$i]);
    if(max($x_vals) > $x_max) {
        $x_max = max($x_vals);
    }
    if(max($y_vals) > $y_max) {
        $y_max = max($y_vals);
    }   
    if(max($z_vals) > $z_max) {
        $z_max = max($z_vals);
    }   
    if(min($x_vals) < $x_min) {
        $x_min = min($x_vals);
    }
    if(min($y_vals) < $y_min) {
        $y_min = min($y_vals);
    }   
    if(min($z_vals) < $z_min) {
        $z_min = min($z_vals);
    }   
   
}
$x_dim = $x_max - $x_min;
$y_dim = $y_max - $y_min;
$z_dim = $z_max - $z_min;

$volume = $x_dim*$y_dim*$z_dim;

$raw_cost = 15;
$tray_cost = $raw_cost;
$material_cost = $raw_cost*$volume*1.02;
$support_cost = $raw_cost*2;
$total = $tray_cost + $material_cost + $support_cost;
echo "$".number_format($total, 2, '.', ',');
$fits=0;
if($x_dim<140 && $x_dim<140 && $z_dim<90)
    $fits=1;
if($x_dim<140 && $x_dim<90 && $z_dim<140)
    $fits=1;
if($x_dim<90 && $x_dim<140 && $z_dim<140)
    $fits=1;
$volumeovercharge=$volume/30000;


$volumeovercharge=round($volumeovercharge,0);


//is volume < 0.5
if($volumeovercharge==0 && $volume>0)$volumeovercharge=1;
if($fits==0)$volumeovercharge=-1;
echo "\n<br>".$x_dim;echo "\n<br>";
echo "$".number_format($volume, 2, '.', ',');
echo "\n<br>".$y_dim;
echo "\n<br>".$z_dim;
echo "\n<br>".$fits;
echo "\n<br>k".$volumeovercharge;

return $volumeovercharge;
}
//stlhandling(0,0,"4.stl");
?>